Genova 1-1/2" 1/4 Bend Street DWV

Description

The Genova 1-1/2" 1/4 Bend Street DWV fitting handles 90-degree direction changes in drain, waste, and vent piping with fewer parts than a conventional elbow and coupling combination. A street elbow pairs one hub end with one spigot end, so the fitting slides directly into an adjacent hub without an extra coupling in between. The shorter joint stack takes up less room in walls, floors, and other confined areas where space is limited. Both the hub and the spigot require PVC primer and cement for a permanent, solvent-welded bond. The Genova 72916 matches standard 1-1/2" DWV pipe dimensions and serves anywhere a right-angle turn is needed in a plastic drainage layout.

Features

• Street Elbow Configuration: Hub on one end, spigot on the other for direct fitting-to-fitting joints
• Full 90-Degree Angle: Redirects pipe flow through a complete right-angle turn
• 1-1/2" DWV Sizing: Fits standard pipe dimensions for drainage applications
• Solvent-Weld Bonding: Glue both the hub and spigot ends with PVC primer and cement
• Fewer Fittings Required: Eliminates the separate coupling needed with a standard elbow
• Genova Part 72916: Manufacturer reference for simplified ordering and product identification

Specifications

• Material: PVC

Warranty