Dremel 36-Pack 15/16" Cutting Wheels

Description

Turn your Dremel rotary tool into a cutting machine with the 409 Dremel Cut-Off Wheels. Good for slicing, making straight cuts and slots in all kinds of metal, like hardened steel, sheets metal or aluminum. The cut-off wheels feature a 15/16 In. (23.8 mm) wheel diameter and 0.025 In. (0.6 mm) thick blade making it ideal to cut, groove, and trim a variety of metals, thin wood, or plastics; can also be used to make slots in rusted or stripped bolts and screws. For use with the 402 mandrel only. Pack of 36 wheels.

Features

• Ideal for cutting, grooving and trimming all kinds of metal
• May also be used on other materials including thin wood, plastics, sheet metal, and ceramics
• Easily cuts bolts or screws
• Make slots in rusted or stripped bolts and screws for removal with a screwdriver
• Use with mandrel 402
• Cuts only along its edge
• 36 per vial

Specifications

• 15/16 In. (23.8 mm) Cut-Off Wheels
• Blade Thickness: 0.025"
• Shank Diameter: 0.125"
• The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
• Secure objects to a stable surface while working.
• Hold the tool so that the wheel is at a perpendicular angle to the material being cut.
• Keep a light touch, as the wheel will break under too much pressure. If chattering occurs, increase speed.
• Plastics require very slow speeds, because they tend to melt at the contact point. Wood requires low speeds also, always experiment on a scrap first.
• Diameter: 15/16"
• Quantity: 1
• Application: Cuts screws and rusty bolts
• Type: Regular