Blazer International 10-Pack Noise Reducing Inserts

Photo of 10-Pack Noise Reducing Inserts

Description

Drastically dampen the noise that is produced by light bars that are installed on the roof or top windshield while moving at high speeds. Blazer 10 Pack Noise Reducing Inserts are designed to slide into the heat sink on the back of the light bar. Spread inserts evenly across light bar cooling fins. The PVC inserts are easy to install and will not lose grip or interfere with light operation. Each kit comes with 10 inserts. These inserts are intended for use on Blazer branded double row light bars 22" and above and may not stop or reduce all noises created by a light bar.

Features

  • No tools required for installation - snaps into heat sink fins
  • PVC inserts reduce vibration noise caused by wind, road and terrain
  • Noise reducers fit light bars with 12 heat sink fins
  • Recommended use: 1 insert for every 8-10 inches
  • Package includes 10 pieces

Warranty

<p><p>Hopkins Manufacturing Corporation warrants this product to be free from defects in material and workmanship, under normal use and service, for the original buyer, for a period of 90 days from the date of original purchase.</p><p>This warranty does not cover, and Hopkins Manufacturing Corporation is not liable for, the cost of repair or replacement of parts which have been subjected to misuse, negligence, accident, improper installation, modification, or normal deterioration due to wear and exposure, or defects caused by unauthorized repairs. THE ORIGINAL BUYER'S EXCLUSIVE REMEDIES UNDER THIS LIMITED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT (AT THE OPTION OF HOPKINS MANUFACTURING CORPORATION) OF THE DEFECTIVE PRODUCT OR PART. The repair or replacement of the product or part under warranty will be made by Hopkins Manufacturing Corporation without charge for parts or labor.</p><p>ALL WARRANTIES IMPLIED BY LAW, INCLUDING BUT NOT LIMITED TO WARRANTIES FOR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ON DEFECTS IN THE MATERIAL AND WORKMANSHIP SHALL BE EFFECTIVE ONLY FOR A PERIOD OF 90 DAYS FROM THE DATE OF PURCHASE.</p><p>UNDER NO CIRCUMSTANCES WILL HOPKINS MANUFACTURING CORPORATION BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO DAMAGE TO OR LOSS OF OTHER PROPERTY OR EQUIPMENT.</p><p>Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.</p><p>In order to obtain performance under this warranty, return the defective product, postage prepaid, along with dated proof of purchase, to Hopkins Manufacturing Corporation, 428 Peyton Street, Emporia, Kansas 66801-1157. This warranty does not cover shipping and delivery charges to or from Hopkins Manufacturing Corporation.</p></p>
Blazer International 10-Pack Noise Reducing Inserts }}
Shop All Blazer International
Blain # 1370593
Mfr # CWL627
Photo of 10-Pack Noise Reducing Inserts
Blazer International 10-Pack Noise Reducing Inserts }}
Shop All Blazer International
Blain # 1370593
Mfr # CWL627
$ 0 44

Description

Drastically dampen the noise that is produced by light bars that are installed on the roof or top windshield while moving at high speeds. Blazer 10 Pack Noise Reducing Inserts are designed to slide into the heat sink on the back of the light bar. Spread inserts evenly across light bar cooling fins. The PVC inserts are easy to install and will not lose grip or interfere with light operation. Each kit comes with 10 inserts. These inserts are intended for use on Blazer branded double row light bars 22" and above and may not stop or reduce all noises created by a light bar.

Features

  • No tools required for installation - snaps into heat sink fins
  • PVC inserts reduce vibration noise caused by wind, road and terrain
  • Noise reducers fit light bars with 12 heat sink fins
  • Recommended use: 1 insert for every 8-10 inches
  • Package includes 10 pieces

Warranty

<p><p>Hopkins Manufacturing Corporation warrants this product to be free from defects in material and workmanship, under normal use and service, for the original buyer, for a period of 90 days from the date of original purchase.</p><p>This warranty does not cover, and Hopkins Manufacturing Corporation is not liable for, the cost of repair or replacement of parts which have been subjected to misuse, negligence, accident, improper installation, modification, or normal deterioration due to wear and exposure, or defects caused by unauthorized repairs. THE ORIGINAL BUYER'S EXCLUSIVE REMEDIES UNDER THIS LIMITED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT (AT THE OPTION OF HOPKINS MANUFACTURING CORPORATION) OF THE DEFECTIVE PRODUCT OR PART. The repair or replacement of the product or part under warranty will be made by Hopkins Manufacturing Corporation without charge for parts or labor.</p><p>ALL WARRANTIES IMPLIED BY LAW, INCLUDING BUT NOT LIMITED TO WARRANTIES FOR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ON DEFECTS IN THE MATERIAL AND WORKMANSHIP SHALL BE EFFECTIVE ONLY FOR A PERIOD OF 90 DAYS FROM THE DATE OF PURCHASE.</p><p>UNDER NO CIRCUMSTANCES WILL HOPKINS MANUFACTURING CORPORATION BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO DAMAGE TO OR LOSS OF OTHER PROPERTY OR EQUIPMENT.</p><p>Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.</p><p>In order to obtain performance under this warranty, return the defective product, postage prepaid, along with dated proof of purchase, to Hopkins Manufacturing Corporation, 428 Peyton Street, Emporia, Kansas 66801-1157. This warranty does not cover shipping and delivery charges to or from Hopkins Manufacturing Corporation.</p></p>

Product Q & A

Customer Reviews