Mailbox Makeover
That boring old mailbox is never going to get any compliments from your neighbors. Give it a makeover with Rust-Oleum® Stops Rust® Copper Hammer Spray and a little time in the garage. It's quick, it's easy and you'll love it!
Materials Checklist:
- Solar Group
Standard Size Post Mount Mailbox
Blain # 040325
View Detail - 3M™
Aluminum Oxide Sandpaper
Blain # 016918 - Rust-Oleum®
Stops Rust® Clean Metal Primer
Blain # 493074
View Detail - Rust-Oleum®
Stops Rust® Hammered Enamel Spray
Blain # 493102
View Detail
Instructions:
- Prep. Remove any debris or rust with sandpaper and/or wire brush. Clean surface with soap and water.
- Prime. It is recommended that you apply one coat of Stops Rust® Primer to the mailbox. Be sure to follow the manufacturer’s recommendations on preparation, application, drying times and clean up.
- Paint. Apply one coat of Stops Rust® Copper Hammered Spray, making sure that corners, edges and heavily pitted areas are adequately covered. Apply a second coat, if necessary, within 2 hours or after 48 hours.
- Voila! A new twist on an old mailbox.