Great Brands. Great Value. Since 1955.
1-800-210-2370 Order by Phone:

Behlen Country AHW80 Electric Waterer

Blain # 291358 | Mfr # 54150018

$389.99

Features

  • One piece, heavily insulated drinkers
  • All poly, rust and corrosion free
  • Thick Styrofoam floor keeps the frost line below the drinker
  • Urethane insulation in the walls is over four times the insulation found in other models
  • Features a low wattage, infrared heat pad placed directly under the water trough (starts at approximately 42° F)
  • Produces more heat using less that 1/4 of the electricity of 500 watt heaters
  • Double insulated design eliminates the possibility of stray voltage that can be a problem in metal drinkers
  • Heat pads are totally isolated from the animal to prevent danger of shock from the heating element
  • An optional low pressure valve is available for special applications
  • Units have a non siphoning easy maintenance (BL) water valve, built - in hold downs, removable drain plugs, and easy accessible doors
  • Fully assembled and ready to install

Technical Description

Height to Trough: 24"
Watts: 100
Amperage: 1A
Application: cattle
Height: 28"
Width: 18"
Length: 30"
Capacity: 80 animals
Weight: 55 lb
Color: Black/Green

Product Reviews

Q & A

Behlen Country AHW80 Electric Waterer
Already Asked: 2 Questions, 7 Answers
Sort by:
Blain's Farm and Fleet Store asked: Why did you choose this?
helen b: suits our needs and hopefully it is as good as advertised Oct 25, 2013
Scott M: It best suits our needs Oct 23, 2013
susan k: I have had this same waterer for about 15 years and have no complaints. Also with the low watage heater it is inexpensive to run. Oct 22, 2013
Dawn H: Great price and a great product Oct 18, 2013
A shopper asked: Can you explain how the waterer would be mounted and how the water line and electricity would be connected?

Thank you.
Nov 18, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Richard H: We recently installed our second set of Behlen waterers bringing our total to eleven. We auger a hole at the center of the installation site. Then ditchwitch a three foot trench to lay pipe and electric wire. We insert a 1' steel culvert cut to 3 1/2' length set on bricks so the pipe and wire can be brought up the pipe (between the bricks) without fear of damage. We also use a "spacer" like in wells to keep the pipe and wire away from the sides of the culvert. Form and pour a concrete slab to the top of the culvert. We made ours about 8" thick. Hammer drill the four corners and attach the unit with lags. The connection is easy with an electric junction box already attached within the unit. We put a shutoff valve in each unit in case service is needed and attach with clamps to the hose provided with the unit.

The new units have some improvements which we like and they all work well for us. Our units are shared between several paddocks and fields and provide for about 120 horses.

Hope this is helpful.
Nov 24, 2013
Reply to Richard Good answer? Yes (0) No (0)
Joseph L: I like the waterer. To hook it up I just put a plug on it and pluged it in. The water just hooks up with a hose and hose clamp. I poured a concrete slab with a couple bags of redimix and put bolts in it to mount it. Nov 19, 2013
Reply to Joseph Good answer? Yes (0) No (0)
Karen T: This is not a self filling water bucket, you have to change and add water yourself. You simply plug it into an electrical outlet. Nov 30, 2013
Reply to Karen Good answer? Yes (0) No (1)
Blain's Farm & Fleet is Upfront
© 2003 - 2014 Blain Supply, Inc. | Home | Site Map
Prices were current at the time of posting. We reserve the right to change prices without notice and to correct errors.