Filter Products
Air Staplers & Nailers
PORTER-CABLE 2-1/2" 16 Gauge Finish Nailer Kit
- Maintenance - free motor designed to deliver long life
- Internal piston catch for consistent max power on every shot
- Tool - free depth - of - drive adjustment with detents for proper setting of n...
- Online
- In Stores
PORTER-CABLE Pin Nailer
- Uses headless and slight head pin nails
- Long life maintenance free motor to keep from straining the work surface
- Consistent power and penetration to sink nail sub - flush into Oak
- Online
- In Stores
Stanley Bostitch 15 Gauge FN Style Angle Finish Nailer
- World’s First 15ga tool with ultra-quiet rear exhaust to direct air away from the user
- Integrated air blower allows user to clear away debris fromwork surface (patent-pending)
- LED work-light for...
- Online
- In Stores
Stanley Bostitch Cool Roofing Nailer
- 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty
- Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
- Durabl...
- Online
- In Stores
Stanley Bostitch Framing Nailer
- Patented push button adjustable depth guide sets nail to desired depths quickly and conveniently
- Notched 16" layout indicator on magazine helps achieve correct distance between studs in a matter ...
- Online
- In Stores
Stanley Bostitch Narrow Crown Stapler
- Oil-free operation requires no regular maintenance and eliminates the risk of oil stains
- Selectable trigger system converts from sequential to contact operation
- Low nail lockout prevents dry firing
- Online
- In Stores
PORTER-CABLE Angle Finish Nailer
- Maintenance - free motor designed to deliver long life
- Internal piston catch for consistent max power on every shot
- Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
- Online
- In Stores
Stanley Bostitch 15 Gauge Angled Cordless Finish Nailer
- Lightweight construction at 4.2 lbs
- Precision Balanced with battery inline for ergonomics and control
- Tool-Free Depth Control for precise fastener placement
- Online
- In Stores
Stanley Bostitch 28 Degree Cordless Framing Nailer
- Drives 28° Wire-Weld Nails
- Lightweight at just 8.3 lbs.
- Precision Balanced with battery inline for ergonomics and control
- Online
- In Stores
SUREBONDER 18 Gauge 2" Brad Nailer
- Drives 3/4" through 2" 18 gauge brad nails
- Rubber grip for comfort
- Lightweight body
- Online
- In Stores
SUREBONDER Clipped Head 3-1/2" Framing Nailer
- Drives 2" through 3-1/2" clipped head 30º - 34º paper tape nails
- Lightweight
- Rugged cast aluminum construction
- Online
- In Stores
SUREBONDER Narrow Crown Pneumatic Stapler - T50 Staples
- Drives 1/4" through 9/16" heavy duty staples, same as Arrow T50 staples
- Rubber grip for comfort
- Lightweight body
- Online
- In Stores
PORTER-CABLE 1-1/2" 18ga 1/4" Crown Stapler Kit
- Long life maintenance-free motor to keep from staining the work surface
- Tool - free depth - of - drive adjustment with detents for proper setting of staples
- Rear exhaust to keep contaminates awa...
- Online
- In Stores
PORTER-CABLE 1-3/4" Coil Roofing Nailer Kit
- Compact body design is 5-percent lighter for improved balance and control compared to previous model
- Tool - free adjustable shingle guide for accurate shingle placement
- Quick - set depth of driv...
- Online
- In Stores
PORTER-CABLE 2" 18ga Brad Nailer Kit
- Long life maintenance - free motor to keep from staining the work surface
- Tool - free depth - of - drive adjustment with detents for proper setting of nail heads
- Tool - free jam release mechanis...
- Online
- In Stores
PORTER-CABLE 3-1/2" Clipped Head Framing Nailer Kit
- Lightweight at just 7.3-Pound
- Power to drive nails up to 3-1/2-Inch x .131-Inch into engineered lumber
- Selectable trigger with trigger lockout for restrictive or contact actuation mode
- Online
- In Stores
Stanley Bostitch Mini Impact Palm Nailer
- Rubber grip designed to insulate and reduce vibration
- Weighs only 1 lb.
- 360° swivel air fitting for maximum accessibility
- Online
- In Stores
SUREBONDER 1/4" Crown 18 Gauge 1-9/16" Stapler
- Drives 5/8" through 1-9/16" staples
- Uses 1/4" Crown (18 gauge) staples
- Rubber grip for comfort
- Online
- In Stores
Paslode 16 Gauge Angled Finish Nails
- For use in IM250A - 16g angled finish nail (part # 900600)
- Chisel point reduces wood splitting
- Galavanized for superior corrosion resistance
- Online
- In Stores
Paslode 16g Straight Finish Nail
- Stronger, stiffer 16 gauge nail ensures consistent drivability
- Galavanized for superior corrosion resistance
- Online
- In Stores
Paslode 3" Ring Hot Dipped Galvanized 30 Degree Framing Nail
- Hot dipped galvanized superior corrosion protection for use in all pressure treated lumber applications, such as ACQ and MCQ
- Polymer coating reduces staining and streaking by 80% compared to trad...
- Online
- In Stores
Paslode Brite 3 - 1/4" 30 Degree Round Head Framing Nail
- Paper collated strips do not break if dropped or detereorate in wet weather
- Paper tape eliminates flying, stinging plastic pieces
- Maximum holding power
- Online
- In Stores
Paslode Cordless 18 Gauge Brad Nailer
- Save time, work anywhere—No hoses or compressors to drag around
- Prevents wood splitting—18 Gauge leaves small holes
- Precise & compact—Open line of site, drives nails where you want it to!
- Online
- In Stores
Paslode Cordless 2 Pack Red Framing Fuel Cells
- For use in Paslode CT and older generation cordless tools - not to be used with cordless CF tools
- Ready to use when cap is clicked from front -to - back
- Check bottom of cell for "Best - Used - ...
- Online
- In Stores
PORTER-CABLE 1-1/2" 18 Gauge Narrow Crown Stapler Kit
- Long life maintenance - free motor to keep from staining the work surface
- Internal piston catch for consistent max power on every shot
- Rear exhaust to keep contaminates away from work
- Online
- In Stores